Global Print Finishing Equipment Ltd.
Unit A, Kirkgate Business Centre
Chantry Bridge, Wakefield
West Yorkshire WF1 5DL
England

Tel: +44 1924 332425

  

Worldwide suppliers of print finishing machinery

AVAILABLE IMMEDIATELY

2000 SAKURAI MAESTRO MS102A spot coating line

72 x 102 cm, min sheet 56 x 35 cm, max printing area 70 x 102 cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer, fully automatic stacker, speed up to 3,300 sph (8543)

2007 SAKURAI MAESTRO MS102AII spot coating line

75 x 105 cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer with hot air module, Trumax fully automatic stacker, refrigeration unit (8565)

2007 AUTOBOND 76CT film laminating machine

102 x 72 cm, for water based and dry (thermal) lamination, Heidelberg automatic pile suction feed with back separation, Autobond Sheetmaster automatic sheet separator, fully automatic stacker, speed up to 80 m/min, stock from 90 – 600 gsm, 1.8m diameter laminating drum (8557)


We supply the following types of used machinery:

Our engineers are widely experienced in the Printing and Paper Converting Industry. We are also available to move and relocate your machinery, either internally or to new sites. We will be pleased to offer references from customers where we have recently completed major installations.

Please see below our latest list of machines available (updated 15 November).

Spot coaters

Roland

  • Roland RKH3B, 0, spot and surface coating machine, 72 x 102 cm, Mabeg automatic pile suction feeder, continuous stacker and delivery, hot air drying, converted for varnishing in 1998 (8496)

Sakurai

  • 2000 Sakurai Maestro MF80, 80 x 60 cm, min sheet 35 x 27 cm, print area 80 x 58 cm, automatic pile feeder, GTB hot and cold air dryer, fully automatic stacker, substrate thickness 0.1 – 3 mm (8429)
  • 1996 Sakurai SC112AII, 80 x 113 cm, min sheet 38 x 60cm, max printing area 78 x 113cm, automatic pile suction feed with back separation, Trumax UV dryer with hot air module, Trumax automatic stacker, speed up to 3,300iph (8582)
  • 2000 Sakurai VITESSA CLASSIC G2, 79, min sheet 32 x 43cm, automatic pile suction feed with back separation, Trumax UV combination dryer with hot air, Trumax automatic stacker, selection of frames (8586)
  • 2008 Sakurai Maestro MS102AII, 75 x 105 cm, , automatic pile suction feeder with back separation, Trumax 2 lamp UV dryer, hot air module, Trumax fully automatic stacker (8559)
  • 2008 Sakurai Maestro MS102AII, 75 x 105 cm, automatic pile suction feed with back separation, Keywell UV dryer, belt width 1083 mm, fully automatic stacker (8454)
  • 2000 Sakurai Maestro MS102A, 72 x 102 cm, min sheet 56 x 35 cm, max printing area 70 x 102 cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer, fully automatic stacker, speed up to 3,300 sph, refrigerated cooling (8543)
  • 1995 Sakurai Maestro MS102A, 72 x 102 cm, max printing area 70 x 102cm, automatic pile suction feed with back separation, Abbess 2 lamp UV dryer with hot air, Sakurai fully automatic stacker, speed up to 3,300sph (8598)
  • 1986 Sakurai SC102A, 72 x 102 cm, max printing area 70 x 102cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer, fully automatic stacker (8584)
  • 1997 Sakurai SC72A, 72, max printing area 700 x 520mm, Sakurai automatic pile suction feeder with back separation, 2001 Natgraph UV dryer (2 lamps) with hot air module, fully automatic stacker, selection of frames (8587)
  • 1990 Sakurai SC72A, 72 x 52 cm, max printing area 70 x 52cm, automatic pile suction feed with back separation, UV dryer with 2 lamps, 3 IR dryers, cooling unit on delivery (8592)
  • 2015 Sakurai SC72AII, 72 x 52 cm, min sheet 35 x 27 cm, max printable size 72 x 50 cm, front pickup feeder, machine can be purchased stand alone or with Trumax 1 lamp UV dryer with hot air (8528)
  • 1990 Sakurai SC52A, 56 x 40 cm, min sheet 30 x 25 cm, max print area 50 x 38 cm, automatic pile suction feeder, wicket dryer, speed up to 3600 sph (8254)

SPS

  • 2000 SPS Vitessa Classic G2, 79 x 104 cm, min sheet 32 x 43cm, automatic pile suction feed with back separation, Trumax UV combinatoin dryer with hot air, Trumax automatic stacker, selection of frames (8586)

Steinemann

  • 2009 Steinemann Hibis 104, 74 x 104 cm, Mabeg pile suction feeder, UV drying, UV flexo unit for full surface coating, Mirus fully automatic stacker, IR drying unit, full rotary screen making equipment (8453)
  • 2001 Steinemann Topspot 102, 72 x 102 cm, Mabeg automatic pile suction feeder, long flow out to UV dryer, fully automatic stacker, speed up to 8,000 sph, sheet weight 80 – 400 gsm (8510)
  • 2000 Steinemann Topspot 102, 72 x 102 cm, Mabeg automatic pile suction feeder, long flow out to UV dryer, fully automatic stacker, speed up to 8,000sph, sheet weight 80-400gsm (8581)

Wen Chyuan

  • 2007 Wen Chyuan KYU-9W-120, 82, min sheet size 30 x 30cm, automatic pile suction feeder, UV drying with 3 lamps, IR drying with 9 lamps, fully automatic stacker (8588)

Surface coaters

KBA

  • 2005 KBA Rapida 105RA-LCXALV2, 74 x 105 cm, min sheet 35 x 50cm, automatic pile suction feeder, Harris & Bruno UV spot & surface coating, speed up to 15,000sph, fully automatic stacker, cardboard equipment, sheet thickness from 80gsm-1.2mm. (8605)

Roland

  • Roland Roland, 72 x 102 cm, Mabeg automatic pile suction feeder, Printworld UV dryer, continuous delivery, spot and surface coating (8065)
  • Roland Roland, 72 x 102 cm, Mabeg automatic pile suction feeder, Colordry UV dryer, continuous delivery, spot and surface coating (8064)

Steinemann

  • 2005 Steinemann Colibri 74, 74 x 104 cm, min sheet 21 x 25 cm, Mabeg automatic pile suction feeder, speed up to 10,000 sph, stock handled 70 – 600 gsm, fully automatic stacker (8545)
  • 1993 Steinemann COLIBRI 72, 72 x 102 cm, min sheet 21 x 25cm, Mabeg automatic pile suction feeder, UV dryer, speed up to 10,000sph, stock handled 600-700gsm, air knife, fully automatic stacker (8583)

Ancillary equipment

Manfred Rachnor

  • Manfred Rachnor P1000 P/a, 45, pallet turner (8601)

Board to board laminators

Lamina

  • 2006 Lamina 1416FA, 140 x 160 cm, Blackline automatic board laminator, max sheet 140 x 160 cm, fully automatic with PLC control, sheet to sheet lamination (8547)

Stock

  • 2003 Stock STOCK, 150 x 164 cm, top & bottom automatic feeding, continuous delivery (8595)

Tunkers

  • 1996 Tunkers 1400 DBE, 140 x 140 cm, fully automatic, substrates from 250gsm-12mm, automatic top & bottom feeder, continuous delivery (8600)

Water-based laminators

Autobond

  • 2007 Autobond 76CT, 102 x 72 cm, for water based and dry lamination, Heidelberg automatic pile suction feed with back separation, Autobond Sheetmaster automatic sheet separator, fully auto stacker, speed up to 80 m/min, stock from 90 – 600 gsm, 1.8m diameter laminating drum (8557)

Billhöfer

  • 1998 Billhöfer EK102-50, 102 x 114 cm, max sheet 102 x 114cm, A20-P automatic pile suction feeder, TM102-80 automatic sheet separator, speed up to 50m/min, total hours worked 25,500. (8604)
  • 1988 Billhöfer FK102, 102 x 142 cm, Mabeg automatic pile suction feeder, TPM automatic separator, flying knife for polyester, Billhöfer automatic stacker (8546)
  • Billhöfer MLK 102, 102 x 102 cm, Mabeg automatic pile suction feed, traversing knife separator, water heater, jogger table delivery, ideally suitable for metallised film and polyester (8490)

Ecotack

  • 1995 Ecotack ESV, 102 x 142 cm, min 45 x 32 cm, automatic pile suction feeder, automatic sheet separator, powder spray removal device, fully automatic stacker, speed up to 60 m/min, film sltting device (7972)

Solventless laminators

Bonardi

  • 2000 Bonardi Bonardi, 122, reel to reel, coating width 1200 mm, production speed up to 300 m/min, max unwind and rewind dia 800 mm, suitable for laminating polyethylene/paper, OPP/polyethylene, paper/aluminium, aluminium/polyethylene, OPP/aluminium, PET/AL, PET/PE (8464)

DCM

  • 1996 DCM Laminastar 2, 135, reel to reel, max lamination width 121 cm, speed up to 300 m/min, unwind/rewind diameter 100 cm, laminates PP, PE, PET, PA, AL, cast films, metallised films and paper (8459)

Steinemann

  • 2006 Steinemann Lotus 102SF, 102 x 142 cm, Mabeg pile suction feeder, rotary hot knife, Mirus fully automatic stacker with blow-down system, powder spray removal device, sheet weight 100 – 600 gsm, speed up to 80 m/min (8508)
  • 2004 Steinemann Lotus 72SF, 72 x 102 cm, 22 x 30 cm, Mabeg automatic pile suction feed, rotary hot knife, Mirus fully automatic stacker with blow down system, production up to 10,000 sph, sheet weight 100 – 600 gsm (8516)

Thermal laminators

Autobond

  • 2004 Autobond 102T, 102 x 74 cm, min sheet 21 x 30cm, Heidelberg automatic pile suction feeder, automatic sheet separator, Autobond fully automatic stacker (8437)
  • 2003 Autobond 102TP, 76 x 102 cm, Heidelberg automatic pile suction feed with back separation, Autobond sheet separator, jogger table delivery, Tool temp water heater (2015), single or double sided lamination (8599)

Paperplast

  • 1993 Paperplast DRY 70/102, 102 x 142 cm, min sheet size 30 x 28cm, Mabeg automatic pile suction feed with back separation, Paperplast automatic sheet separator, Paperplast fully automatic stacker (refurbished by Paperplast 2005) (8585)
  • 2000 Paperplast Dry 50/76, 76 x 102 cm, Mabeg automatic pile suction feed with back separation, automatic sheet separator, fully automatic stacker, speed up to 50 mpm (8230)
  • 2000 Paperplast DRY 60/76, 76, min sheet 21 x 21cm, Mabeg automatic pile suction feeder, automatic sheet separator, fully automatic stacker, speed up to 60m/min (8589)

Wen Chyuan

  • 2007 Wen Chyuan KYE-8DR-A, 91 x 102 cm, min sheet 27 x 30 cm, automatic pile feed, powder spray removal device, disc knife automatic sheet separator, fully automatic stacker, hot water heating system, sheet weight 100 – 500 gsm, speed up to 60 m/min (8416)

Printing machinery

Bielloni

  • 2001 Bielloni Castello AXSA, 132, width 1200 mm, print repeat 340 – 1100 mm, gear pitch 5 mm, speed up to 200 m/min, unwind/rewind dia 1200 mm, suitable for paper 70 – 160 gsm, PP 45 – 70 mic, IDPE, PET, OPA, Multilayer film (8524)

Hot foil stamping

Heidelberg

  • Heidelberg Heidelberg, 40 x 57 cm, automatic pile suction feeder, 4 automatic foil unwinds (8590)

Johannisberg

  • Johannisberg Johannisberg, 73 x 104 cm, hot foil stamping cylinder, , 4 heating zones, 4 automatic rewinds, honeycomb base, letterpress conversion of software (8523)

Starfoil

  • 1998 Starfoil hot foil stamping cylinder, 73 x 104 cm, automatic pile suction feeder continuous delivery, 2 foil unwind bars, two rewind programmable foil pulls, 6 heating zones, pre-load table, interlocked guards (8331)

Steuer

  • Steuer PZ104, 73 x 104 cm, min sheet size 36 x 52 cm, automatic pile suction feed, 4 heating zones, speed up to 3,000 sph, max sheet thickness 0.75 mm, 3 independent cycles per programme (8551)
  • 2006 Steuer PZ104H, 73 x 104 cm, min sheet size 36 x 52 cm, automatic pile suction feeder, feeder pile height 1.8 m delivery pile height 0.6 m, 4 heating zones, 4 programmatic foil pulls, 3 honeycomb base plates (8468)

Die cutters

Bobst

  • 1985 Bobst SP142ER, 102 x 142 cm, min size 40 x 50cm, working hours 35,000, speed up to 6,500sph, presure 500 ton, double stripping, centreline system, oil heating & cooling system, blanking, non-stop feeder, machine elevated for higher production (8593)

Curioni

  • Curioni automatic corrugated box making machine, 240 x 98 cm, for the printing, converting and folding of corrugated boards into carton boxes, 2 colour machine, automatic feeder, , min sheet size 90 x 30 cm (8450)

Heidelberg

  • 2006 Heidelberg Varimatrix 105CS, 105 x 75 cm, automatic stripper, continuous feeder, electronic double sheet control (8594)

Kohmann

  • Kohmann FEMS, 68 x 68 cm, rotary window patcher, max sheet size 26.3/4" x 26.3/4", min sheet size 4" x 3.1/4", largest patch area 15"x 16.1/2", cutt of length from 1.5/8"-15.3/4", width of lining material up to 21.1/4", max speed on blank length 12.1/2" = 300 pieces/hr (8603)

Omega

  • 2006 Omega OMEGA, 145, automatic folder gluer, straight line, double wall, crashlock, 3 point gluing, 4 nozzle guns, suitable for B, C & E corrugated board, pressing station (8597)

Sugano

  • 1987 Sugano NFS 1020/C, 78 x 108 cm, min sheet size 296 x 350 mm, maximum cutting size 765 x 1070 mm,automatic pile suction feeder, suitable for board up to 1 mm, min thickness 0.1 mm, corrugated board up to 5 mm, maximum cutting pressure 200 Ton, automatic stripper, automatic stacker (8526)

Tymi

  • 2000 Tymi Planet 260, 123 x 260 cm, min sheet 31 x 63 cm, automatic feeder with kicker system, automatic stacker on to pallets, speed up to 10,000 sph (8455)

Label machinery

Nilpeter

  • 2011 Nilpeter FB3300, 0, flexographic label machine, 8 colour, cleaning device, 3 sections of rotary cutting, max web width 350 mm (8471)

 

SPS Sakurai Saroglia Billhofer Paperplast Steinemann Steuer Autobond Gietz Bobst


Exhibition stand

 

LATEST OFFERS

KBA RAPIDA 105RA-LCXALV2 SPOT & SURFACE COATER (8605)

KBA RAPIDA 105RA-LCXALV2 SPOT & SURFACE COATER (8605)

74 x 105cm, min sheet 35 x 50cm, automatic pile suction feeder, Harris & Bruno UV spot & surface coating, speed up to 15,000sph, fully automatic stacker, cardboard equipment, sheet thickness from 80gsm-1.2mm.

1998, BILLHOFER EK102-50 FILM LAMINATOR (8604)

max sheet 102 x 114cm, A20-P automatic pile suction feeder, TM102-80 automatic sheet separator, speed up to 50m/min, total hours worked 25,500.

KOHMANN ROTARY WINDOW PATCHER MODEL FEMS (8603)

KOHMANN ROTARY WINDOW PATCHER MODEL FEMS (8603)

rotary window patcher, max sheet size 26.3/4" x 26.3/4", min sheet size 4" x 3.1/4", largest patch area 15"x 16.1/2", cutt of length from 1.5/8"-15.3/4", width of lining material up to 21.1/4", max speed on blank length

1996, TUNKERS 1400 DBE FULLY AUTOMATIC BOARD LAMINATOR (8600)

1996, TUNKERS 1400 DBE FULLY AUTOMATIC BOARD LAMINATOR (8600)

max sheet 1400 x 1400mm, substrates from 250gsm-12mm, automatic top & bottom feeder, continuous delivery

2004, AUTOBOND 102T AUTOMATIC THERMAL LAMINATOR (8437)

2004, AUTOBOND 102T AUTOMATIC THERMAL LAMINATOR (8437)

102 x 74 cm, min sheet 21 x 30cm, Heidelberg automatic pile suction feeder, automatic sheet separator, Autobond fully automatic stacker

2003, AUTOBOND COMPACT 102TP THERMAL LAMINATOR (8599)

2003, AUTOBOND COMPACT 102TP THERMAL LAMINATOR (8599)

76 x 102cm, Heidelberg automatic pile suction feed with back separation, Autobond sheet separator, jogger table delivery, Tool temp water heater (2015), single or double sided lamination

2006, OMEGA AUTOMATIC FOLDER GLUER (8597)

2006, OMEGA AUTOMATIC FOLDER GLUER (8597)

automatic, size 145cm, straight line, double wall, crashlock, 3 point gluing, 4 nozzle guns, suitable for B, C & E corrugated board, pressing station

1995, SAKURAI MAESTRO MS102A SPOT COATER

1995, SAKURAI MAESTRO MS102A SPOT COATER

72 x 102cm, max printing area 70 x 102cm, automatic pile suction feed with back separation, Abbess 2 lamp UV dryer with hot air, Sakurai fully automatic stacker, speed up to 3,300sph (8598)

1986, SAKURAI SC102A SPOT COATER (8584)

1986, SAKURAI SC102A SPOT COATER (8584)

72 x 102cm, max printing area 70 x 102cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer, fully automatic stacker

2003, STOCK AUTOMATIC SHEET LAMINATOR (8595)

2003, STOCK AUTOMATIC SHEET LAMINATOR (8595)

max sheet size 150 x 164cm, top & bottom automatic feeding, continuous delivery

2006, HEIDELBERG VARIMATRIX 105CS AUTOMATIC DIE CUTTER (8594)

Max sheet size 1050 x 750mm, automatic stripper, continuous feeder, electronic double sheet control

1985, BOBST SP142ER AUTOPLATEN (8593)

1985, BOBST SP142ER AUTOPLATEN (8593)

max size 102 x 142cm, min size 40 x 50cm, working hours 35,000, speed up to 6,500sph, pressure 500 ton, double stripping, centreline system, oil heating & cooling system, blanking, non-stop feeder, machine elevated for higher production

1990, SAKURAI SC72A SPOT COATING LINE

1990, SAKURAI SC72A SPOT COATING LINE

72 x 52mm, max printing area 70 x 52cm, automatic pile suction feed with back separation, UV dryer with 2 lamps, 3 IR dryers, cooling unit on delivery (8592)

HEIDELBERG AUTOMATIC HOT FOIL STAMPING CYLINDER (8590)

HEIDELBERG AUTOMATIC HOT FOIL STAMPING CYLINDER (8590)

max sheet size 40 x 57cm, automatic pile suction feeder, 4 automatic foil unwinds

2000, SPS VITESSA CLASSIC G2 AUTOMATIC SPOT COATER (8586)

79 x 104cm, min sheet 32 x 43cm, automatic pile suction feed with back separation, Trumax UV combination dryer with hot air, Trumax automatic stacker, selection of frames

2000, PAPERPLAST DRY 60/76 THERMAL LAMINATOR (8589)

2000, PAPERPLAST DRY 60/76 THERMAL LAMINATOR (8589)

76 x 102cm, min sheet 21 x 21cm, Mabeg automatic pile suction feeder, automatic sheet separator, fully automatic stacker, speed up to 60m/min

2007, WEN CHYUAN KYU-9W-120 SPOT & SURFACE COATER

2007, WEN CHYUAN KYU-9W-120 SPOT & SURFACE COATER

82 x 120cm, min sheet size 30 x 30cm, automatic pile suction feeder, UV drying with 3 lamps, IR drying with 9 lamps, fully automatic stacker (8588)

1997, SAKURAI SC72A SPOT COATING LINE (8587)

1997, SAKURAI SC72A SPOT COATING LINE (8587)

72 x 52cm, max printing area 70 x 52cm, Sakurai automatic pile suction feeder with back separation, 2001 Natgraph UV dryer (2 lamps) with hot air module, fully automatic stacker, selection of frames (8587)

1993, PAPERPLAST DRY 70/102 AUTOMATIC THERMAL LAMINATOR (refurbished by Paperplast 2005)

1993, PAPERPLAST DRY 70/102 AUTOMATIC THERMAL LAMINATOR (refurbished by Paperplast 2005)

102 x 142cm, min sheet size 30 x 28cm, Mabeg automatic pile suction feed with back separation, Paperplast automatic sheet separator, Paperplast fully automatic stacker (8585)

1996, SAKURAI SC112AII SPOT COATING LINE

1996, SAKURAI SC112AII SPOT COATING LINE

80 x 113cm, min sheet 38 x 60cm, max printing area 78 x 113cm, automatic pile suction feed with back separation, Trumax UV dryer with hot air module, Trumax automatic stacker, speed up to 3,300iph (8582)

1993, STEINEMANN COLIBRI 72

1993, STEINEMANN COLIBRI 72

72 x 102cm, min sheet 21 x 25cm, Mabeg automatic pile
suction feeder, UV dryer, speed up to 10,000sph, stock handled 600-700gsm, air knife,
fully automatic stacker (8583)

2007 SHIKI FX1512 (semi-rotary offset) printer

2007 SHIKI FX1512 (semi-rotary offset) printer

max printing width 345 mm, max printing length 320 mm,
6 x offset printing units including manual twist device, Ushio brand 6.4 Kw UV dryer system equipped with
all electronic devices, 1 x unwinder (model: SUA) with loop and dust pick up rollers, 2 x flexo units with
Ushio brand UV dryer system 6.4 Kw including separate pumping units, 4 x Anilox rollers for flexo units
3,5,8 and 34.5 g.m2, 1 x semi rotary die cutting unit with magnetic cylinder Z195, 2 silkscreen print units,
2 hot foil stamping units, 8574a.jpg

2007, SAKURAI MAESTRO MS102AII

2007, SAKURAI MAESTRO MS102AII

spot coating line, 75 x 105 cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer with hot air module, Trumax fully automatic stacker, refrigeration unit (8565)

2000, SAKURAI MAESTRO MS102A (8543)

spot coating line, 72 x 102 cm, min sheet 56 x 35 cm, max printing area
70 x 102 cm, automatic pile suction feed with back separation, Trumax 2 lamp UV dryer, fully automatic
stacker, speed up to 3,300 sph, refrigerated cooling

1996, LAMTEX ECO72

1996, LAMTEX ECO72

thermal laminator, 72 x 102 cm, automatic pile suction feeder, automatic sheet separator, jogger table delivery, stock handled 90 – 450 gsm, speed up to 60 m/min (8554)

2006, STEINEMANN COLIBRI 74 SURFACE COATER

2006, STEINEMANN COLIBRI 74 SURFACE COATER

74 x 104 cm, min sheet 21 x 25 cm, Mabeg automatic pile suction feeder, sheet cleaning device, UV dryer, speed up to 10,000 sph, stock handled 70 – 600 gsm, air knife, fully automatic stacker (8558)

2008, SAKURAI MAESTRO MS102AII SPOT COATING LINE

2008, SAKURAI MAESTRO MS102AII SPOT COATING LINE

75 x 105 cm, automatic pile suction feeder with back separation, Trumax 2 lamp UV dryer, hot air module, Trumax fully automatic stacker (8559)

2007, AUTOBOND 76CT FILM LAMINATING MACHINE

102 x 72 cm, for water based and dry (thermal) lamination, Heidelberg automatic pile suction feed with back separation, Autobond Sheetmaster automatic sheet separator, fully automatic stacker, speed up to 80 m/min, stock from 90 – 600 gsm, 1.8m diameter laminating drum (8557)

2015, SAKURAI SC72AII

2015, SAKURAI SC72AII

spot coating machine, 72 x 52 cm, min sheet 35 x 27 cm, max printable size
72 x 50 cm, front pickup feeder, machine can be purchased stand alone or with Trumax 1 lamp UV dryer
with hot air (8528)

For more information, contact us.